Introduction Meta Quest: Activate Developer Mode for OMNICASTVR (Consumer product)

Do you use Meta Quest headsets (Quest 2, 3, or Pro) for training, event demonstrations, or group experiences? Are you looking for a professional solution to view all screens simultaneously, without the constraints of the internet?

Welcome to the world of OMNICASTVR!

Our internet-free multi-headset casting software is the ideal solution for professional VR deployment. For your Meta Quest headset to communicate effectively with the host PC and OMNICASTVR, a crucial step is required: activating Developer Mode.

This guide will walk you through preparing your Meta Quest, a quick and essential operation to fully benefit from the simultaneous monitoring of up to 15 headsets in local mode.

---

Step 1: Register Your Account as a Meta Developer

Accessing advanced features on your Meta Quest headset requires validating a developer status. This is a standard and free process that unlocks the mode necessary for connecting with third-party software like OMNICASTVR.

1. • Visit the Meta Horizon Developer Dashboard: Go to developers.meta.com/horizon/ and log in with the Meta account linked to your headset.

2. 
   

3. • Create an Organization: Follow the instructions to name and create your organization. If you are an individual user, the name is free (e.g., VR-MyOrganization).

4. 
   

5. • Verify Your Account: Meta will likely require account verification to validate your status. This is typically done by adding a payment method or setting up two-factor authentication via SMS. This step is mandatory.

6. 
   

7. • Accept Terms: Agree to the Non-Disclosure Agreements (NDAs) and Terms of Service if prompted.

Your account is now a Developer Account. It's time to apply this status to the headset.

Step 2: Activate Developer Mode via the Meta Quest Mobile App (H2)

Once your Meta status is validated, you can activate the feature on your device.

1. • Open the Mobile App: Launch the Meta Quest (or Meta Horizon) app on your smartphone.

2. 
   

3. • Ensure Connection: Verify that your headset is powered on and connected to the mobile app.

4. 
   

5. • Access Headset Settings: In the app, go to the menu (profile icon or main menu), then select

6.   Devices or Headset Settings. Select your headset from the list.

7. 
   

8. • Activate Developer Mode:

   • Find and tap on Developer Mode (often under an "Advanced Settings" section).

   • Toggle the switch to enable Developer Mode.

   • 
     

Tip: It is highly recommended to restart your headset after this manipulation to ensure the changes take effect immediately.

Step 3: Confirmation and USB Debugging in the Headset

For perfect integration and to check that everything is in order, perform a verification directly in the headset.

1. • Put on the Headset: Access Settings > System > Developer within the headset interface.

2. 
   

3. • Verify: The presence of this menu confirms activation. Make sure the MTP Notification option (often below the "Enable Developer Settings" line) is enabled or visible.

4. 
   

Step 4: First Wired Connection to OMNICASTVR (H2)

The first connection is a one-time authentication step to permanently link the headset to the OMNICASTVR PC.

1. • Wired Connection: Plug your headset via USB (wired) into the PC where the OMNICASTVR software is installed.

2. 
   

3. • Authorization in the Headset: A message asking "Allow USB Debugging?" will appear inside the headset.

4. 
   

5. • Crucial Action: Click "Always Allow" and confirm.

Once this is done, your headset will be permanently connected to OMNICASTVR. During all your future multi-headset casting sessions, the headset will activate automatically as soon as it is plugged into the station, providing you with an experience that is internet-free and requires no repetitive configuration.

---

Key Takeaways 

Key Point	Summary
Main Objective	Activating Developer Mode on Meta Quest for operation with OMNICASTVR.
Account Prerequisite	Creation of an Organization on the Meta Developer Dashboard and account verification (payment/SMS).
Mobile Activation	Developer Mode is enabled via the Meta Quest mobile app, within the Headset Settings.
Headset Verification	Confirm the presence of Developer options (specifically MTP Notification) in the headset's System Settings.
First Connection	Requires an initial wired connection to authorize connection to the OMNICASTVR PC by selecting "Always Allow".
Final Benefit	Enables stable, internet-free multi-headset streaming without the need for future re-configuration.